2
PRECAUTIONS:
Please ensure this page is read carefully prior to setting up or operating the 3D
printer.
The 3D printer is very sensitive to static electricity, so please ensure sure you connect to a properly
grounded surge protected power outlet.
Before repairing or making any alterations to the 3D printer, it is essential that the machine is turned off and
the power cord is unplugged.
The 3D printer operates at very high temperature so please allow: the nozzle, the extruded plastic, and the
heating plate to cool before handling them.
Some plastic filaments may give off a slight odor when heated and because of this; the machine should
always be operated in a well-ventilated area.
Do not wear gloves when operating or repairing the 3D printer, as entanglement may occur and result in
injury.
Do not leave the machine unattended while in operation.
To Next Page
Loading...