24
2. Select [ Filament ] and [ Load Left ].
3. Wait for the extruder to heat up to the operating temperature. The extruder will alert you once it is at the
operating temperature. Load the filament by inserting it into the extruder at an upright angle.
4. Filament will start to extrude out of the nozzle. Continue loading to ensure that the filament is extruding in a
straight line.
5.3 Unload Filament
1. From the main menu, press the right icon labeled [ Tools ].
2. Select [ Filament ] and [ Unload Left ].
3. Wait for the extruder to heat up to the operating temperature. The extruder will alert you once it is at the
operating temperature. Unload the filament by gently guiding it out of the extruder.
To Next Page
Loading...