EasyManuals Logo

Powtran PI9000-S Series User Manual

Powtran PI9000-S Series
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Chapter1.Inspection and Safety Precautions
2
1-2.Safety precautions
Safety precautions in this manual are divided into the following two categories:
Danger: the dangers caused by failure to perform required operation, may result in
serious injury or even death;
Caution:the dangers caused by failure to perform required operation, may result in
moderate injury or minor injury, and equipment damage;
Process
Type
Explanation
Before
installation
Danger
When unpacking, if control system with water,
parts missed or component damaged are found,
do not install!
If packing list does not match the real name, do
not install!
Gently carry with care, otherwise there is the risk
of damage to equipment!
Please do not use the damaged driver or the
frequency inverter with missed pieces, otherwise
there is the risk of injury!
Do not use your hand to touch the control system
components, otherwise there is the risk of
electrostatic damage!
When
installing
Danger
Please install the unit on the metal or flame
retardant objects; away from combustible material.
Failure to do so may cause a fire!
Never twist the mounting bolts of the equipment
components, especially the bolt with the red mark!
Note
Do not let the lead wires or screws fall into the
driver. Otherwise which may cause damage to the
driver!
Keep the driver installed in the place where less
vibration, avoid direct sunlight.
When two or more converters are installed in a
cabinet, please pay attention to the installation
location, ensure the good heat dissipation effect.
When wiring
Danger
Must comply with this manual's guidance, any
construction shall be performed by a professional
electrician, otherwise there would be the
unexpected risk !
● A circuit breaker must be set between the inverter
and the power supply to separate them, otherwise it
may cause a fire!
Verify if power is a zero-energy status before
wiring, otherwise there is a risk of electric shock!
The inverter shall be grounded correctly
according to standard specifications, otherwise
there is a danger of electrical shock!
Ensure that the distribution line meets the
regional safety standards of EMC requirements.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Powtran PI9000-S Series and is the answer not in the manual?

Powtran PI9000-S Series Specifications

General IconGeneral
BrandPowtran
ModelPI9000-S Series
CategoryInverter
LanguageEnglish

Related product manuals