■ 5 Operation
32
5.4 Application menu operation
This section explains the structure of the application menu and its
functions.
The structure of the application menu is dynamic and can be defined
in the configuration menu (see chapter 5.3.4 "Configuring the
application menu").
If a menu option is disabled in the configuration menu, it is not
contained in the current application menu.
• The settings programmed in the factory are depicted in bold.
• In order to aid clarity, the only part of the menu tree shown in each
function description is the part which relates to the application in
question.
• Explanations on the menu functions are depicted in italics.
5.4.1 Activating the application menu
• Press «MENU» following the start-up process in order to get to the
application menu.
5.4.2 Methods
A changing in the method is automatically saved and is still available
after a restart of the instrument. This method comprises the settings
for the drying program and the starting weight.
The following data is saved for the method:
• Name of the method
Main path Definable functions
METHOD Enter the name of a method
SET TARGET WEIGHT Definition of starting weight help
UNIT Selection of the drying unit
PRINT RATE
Enter the interval time for the print rate
Only if "PRINT RATE" is also set in
printformat
STANDBY TEMP.
Definition of the standby temperature
function
AUTOSTART Definition of the autostart function
To Next Page
Loading...