Precisa XM 50 - Setting Method Name; Starting Weight

5 Operation ■
33
• Drying program with:
– Drying mode
– Drying temperature
– Stop time
–Autostop
– Autostart setting
– Standby temperature
– Unit for the result
• Starting weight with:
– Nominal weight
– Upper weight limit
– Lower weight limit
If the moisture analyser is in weighing mode and the current starting
weight is lower than the minimum sample weight (< 0.2 g), the name
of the method currently loaded is displayed in the info line.
The method and the settings can be printed by keeping the "PRINT"
key pressed in until "PRINT APPLICATIONS" appears (see chapter
5.5.2 "The print key").
5.4.2.1 Setting method name
5.4.3 Starting weight
With the aid of the «TARGET WEIGHT», you can weigh the sample
exactly to check that it matches a defined reference value plus/minus
permissible deviations.
•METHOD
METHOD ttt... Enter the name for the method
•SET
TARGET
WEIGHT
WEIGHT CHECK ON/OFF Switch check on/off
NOMINAL 5.000 g
UPPER LIMIT 6.000 g
LOWER LIMIT 4.000 g
Enter nominal weight
Define upper limit
Define lower limit