Precisa XM 50 - Setting Drying Parameters; Setting and Saving the Configuration

■ 9 Overview
72
9.3.4 Setting drying parameters
9.3.5 Setting and saving the configuration
«MENU» and «T» keys are pressed during switch-on
•
•HEATING PROGRAM
BOOST TIME 3.00 MIN
HEAT MODE STANDARD
BOOST
SOFT
•
• DRYING TEMPERATURE
TEMPERATURE 105°C
•
•DRYING Time
STOP TIME 10.0 MIN
TIMER STOP ON/OFF
•
•STOPMODE
DIGIT/TIME 2/20
AUTO STOP OFF
DIGIT/TIME
ADAPTSTOP
FACTORY CONFIG.
Load factory-configuration.
USER CONFIG.
Load user-configuration.
STORE CONFIG.
Store present configuration as user-con-
figuration.