Precor 946i - Page 20

Product Owner's Manual: Club Features 18
Table 2. Club custom features and settings
Equipment Club Programming Prompt
Factory Default
Setting
Changes you can make
Treadmill Disabled SAFETY CODE
An enabled
All *
safety code requires a 4-digit entry code before users can access any exercise
programs.
English
SELECT LANGUAGE
Several languages affect the display prompts. Choose one.
All * U.S.
SELECT UNITS
Two standard units of measure affect the display prompts. Choose between U.S. or Metric.
All * 60 minutes SET MAX WORKOUT TIME
Exercise session time limits range from 1 to 240 minutes. NO LIMIT is accessible beyond
240 minutes.
All * 120 seconds SET MAX PAUSE TIME
Pause time limits range from 1 to 120 seconds (2 minutes). Restrictions exist for
self-powered units.
All * 5 minutes
SET COOL DOWN TIME
Cool-down time limits range from 0 to 5 minutes.
Treadmill
Maximum speed
available.
SET SPEED LIMIT
Refer to Treadmill: Determining the Club Speed Limit .
Treadmill
Maximum grade
possible.
SET INCLINE LIMIT
Refer to Treadmill: Setting an Incline Limit .
Treadmill † Hide programs
HIDDEN PROGRAMS
Two options are available: Show Programs or Hide Programs. Choose one.
Treadmill Disabled
REMOTE SPEED
CONTROL
A computer must be connected through the CSAFE port to enable this feature and change
the speed or incline for a specific user.
EFX576i,
EFX546i
Mid-level of ramp
incline range
SET CROSSRAMP
AUTO-LEVEL
This prompt only appears on EFX units that have adjustable ramps. Settings range from 1 to
20. Refer to
Cycle
EFX: Changing the Auto-Level Setting.
High
SET RESISTANCE
RANGE
Settings range from High, Medium, and Low. Refer to
All †
Bike: Setting a Resistance Range.
Random profile
SET CUSTOM PROGRAM 1
Modify the program profile. Refer to
Treadmill †
Creating a Custom Program.
Random profile
SET CUSTOM PROGRAM
2
Modify the program profile. Refer to Creating a Custom Program .
* This feature is available in all Precor equipment.
† This program is not available on the 946i treadmill, EFX546i, and EFX556i.
Note: If a user changes the language or unit of measure during an exercise session, the display resets to the club preferences when a user’s workout ends.