Accessing Club Programming Mode
and Changing the Settings
You must be in the Programming mode before you can change the
settings.
To access the programming mode:
1. At the Precor banner, press the following keys in sequence
without pausing between selections:
RESET, 5, 6, 5, 1, 5, 6, 5
Note:
The club programming prompts appear sequentially and in a
menu format. The following table describes which keys to use in
club programming mode.
A PAUSE/RESET key appears on some products and
functions the same as the RESET key.
Table 3. Club Programming Mode keys
Key Description Function
▲ or
Navigational arrow
keys
▼
Moves you through the programs
and selections.
OK OK key Lets you choose or accept the
displayed selection.
BACK BACK key Returns to the previous menu
level without saving any changes.
RESET RESET key or
PAUSE/RESET key
Exits Club Programming Mode
and returns to the Precor banner.
Note: The number keypad is disabled once you enter club
programming mode.
To Next Page
Loading...
