Upright Bike: Adjusting the Seat Tilt
To adjust the seat tilt on an upright cycle, take the following steps.
1. Use a ¹¹⁄₁₆-inch (17 mm) box-end wrench or crescent wrench to
loosen the nut beneath the seat as shown in the following
figure.
Figure 6: Loosening nut to adjust seat tilt
2. Adjust the seat tilt (forward or backward) as shown in the
following figure.
Figure 7: Tilting the seat forward or backward
3. Wrench tighten the nut.
4. Apply pressure to the seat and make sure that it does not move.
Readjust and retighten the nut, if needed.
To Next Page
Loading...
