All The odometer value correlates to the type of
Precor product and the standard of units,
U.S. or Metric, selected in the programs.
ODOMETER
• Treadmill shows the number of
cumulative miles or kilometers logged to
date.
• EFX or AMT shows the number of total
strides logged to date.
• Cycle shows the number of total
revolutions logged to date.
• Climber indicates the number of floors
climbed.
Table 7. Informational Displays for specific equipment or special cases
Product Display Description
534i, 532i,
AMT
Metrics board software part
number and version.
METRICS BOARD SW
PART NUMBER
AMT Stride dial software part
number.
STRIDE DIAL SW
PART NUMBER
Viewing the Error Log
Quick access to the informational display is available if error
messages appear on the display and have been recorded in the
error log. This feature is usually reserved for service personnel.
To view the error log:
1. At the Precor banner, press and hold PAUSE/RESET for 4
seconds.
2. If DIAGS - INFORMATION DISPLAY or ERROR LOG
If any errors are logged, they appear on the display. If no errors
are logged, a message such as
appears, then press OK.
STOP KEY or STUCK KEY
3. Release the PAUSE/RESET key to return to the Precor banner.
appears instead.
Note: On treadmills, the red STOP button can be used instead of
the PAUSE/RESET key.
To Next Page
Loading...
