C546i Self Powered Elliptical Fitness Crosstrainer
Page 11
Procedure 3.4 - Club Settings
1. Start pedalling and continue to pedal as you perform step 2.
2. Enter the club settings by pressing keys RESET,5,6,5,1,5,6,5, sequentially.
3. The message SET CLUB PARAMETERS will be displayed for a few seconds.
4. The message SELECT LANGUAGE will be displayed followed by the currently selected
language. Use the
and keys to select the language preference. Press the ENTER
key to advance to units of measurement.
5. The message SELECT UNITS will be displayed followed by the currently selected unit of
measurement. Use the
and keys to select either U.S. Standard or METRIC
measurements. Press the ENTER key to advance to maximum workout time.
6. The message SET MAX WORKOUT TIME will be displayed followed by the currently
selected maximum workout time. Use the
and keys to select the maximum workout
time. The maximum workout time may be set between 1 and 240 minutes or no limit. Press
ENTER to advance to maximum pause time.
7. The message SET MAX PAUSE TIME will be displayed followed by the currently selected
maximum pause time. Use the
and keys to select the maximum pause time. The
maximum pause time is the that will elapse after the pause key has been pressed until the
unit resets. The maximum pause time may be set between 1 and 120 seconds. Press
ENTER to advance to set cool down time.
8. The message SET COOL DOWN TIME will be displayed followed by the currently selected
cool down time. Use the
and keys to select the cool down time. Cool down time is
the period of time following the completion of a program for the user to cool down at a
reduced work rate. Press ENTER to advance to modify custom programs.
9. The message MODIFY CUSTOM COURSE 1 will be displayed. The modifications
instructions will then be displayed. Press ENTER to save custom course modifications and
to exit club settings program.
To Next Page
Loading...
Need help?
General
