Precor C932i Service Manual

C932i, C946i Treadmill
Page 66
If the deck has already been flipped replace it with a new deck. Make sure that the new deck
surface is clear of debris. Ensure the new deck is installed with the inserts on the bottom of the
deck.
8. The new running belt will have an arrow pointing in one direction on the underside. The arrow
indicates the correct direction of travel for the belt. Premature belt failure will occur if the belt is
installed incorrectly. Slip the new running belt onto the deck and carefully place them back onto
the treadmill.
9. Reinstall the Auto Stop magnet on the right front corner of the deck, if applicable.

Precor C932i Specifications

Power

motor power	2.75 hp
power supply	120 VAC (50/60Hz)
current	15 Amps

Performance

speed range	0.5 - 11 mph (1 - 18 kph)
incline range	0 - 15% grade

Weight and Dimensions

length	79 in (201 cm)
width	34 in (84 cm)
height	55 in (140 cm)
weight	280 lbs (126 kg)
shipping weight	320 lbs (144 kg)
belt dimensions	57 in x 20 in (145 cm x 51 cm)