Precor move beyond S3.15 User Manual

S3.15 Assembly and Maintenance Guide
page 24
1 2 3 4 5 6
11. Attach Accessories
A. At the end of the Top Beam, attach the Lat Bar to
the Main Cable using a spring clip.
Note: The two small hooks at the end of the Top
Beam can be used to store the Lat Bar when it’s
not in use.
B. Install the Triceps Straps to the Ab Cable using the
spring clip.
To vary your exercise routine, you can replace the
Lat Bar and attach the Triceps Straps to the Main
Cable.
C. Attach the Curl Bar to the Leg Extension Cable
using the short piece of chain and two spring clips
(installed at each end of the chain).
To work out leg muscle groups, you can attach a
Soft Ankle Strap, to the end of the cable, instead of
the curl bar.
D. For aesthetics, insert plastic plugs into the unused
mounting holes in the Top Beam, Main Base, and
Rear Crossbar.
Curl
Bar
Ankle
Strap
Lat
Bar
Step 11. Attach Accessories
Triceps
Strap
A
B
C

Precor move beyond S3.15 Specifications

Weight and Dimensions

length	72 inches (182 cm)
height	83 inches (211 cm)
width	51 inches (130 cm)
shipping weight	221 lb (100 kg)