Beginning the Assembly 27
3. Connect the 5-wire entertainment option cable to the
display console. See above figure.
4. Reattach the display console face by aligning the tabs and
applying pressure to the display face. Make sure the audio
cable has a little slack in the "pocket" to ensure it stays in
place.
Figure 18: Display console face attachment
5. Install the integrated controller by aligning the two tabs
and applying pressure. Arrange the cables so you do not
inadvertently pinch or damage the cables.
Important: Cable damaged by improper installation will not
be covered by the Limited Warranty.
Figure 19: Integrated controller attachment
To Next Page
Loading...