28 Installing and Operating the Personal Viewing System (PVS) for Display C
6. If you purchased the optional Personal Entertainment
Player (PEP) feature, attach the RCA cable to the RCA
video connector on the back of the integrated controller.
Figure 20: RCA cable attachment
Installing the Headphone Jack
To install the headphone jack:
1. Feed the audio cable through the base of the display
console and attach it to the headphone jack.
Figure 21: Audio cable routing
2. Insert the headphone jack into the base of the display
console. Snap the headphone jack into place by
positioning the rear tab first, and then applying pressure
to the base.
Figure 22: Headphone jack attachment
To Next Page
Loading...