About the Personal Entertainment Player (PEP) 65
5. Slide the white connector end of the new cable through
the tray and attach it to the receptacle in the PEP. You
should hear an audible click from the connector when it
snaps securely into place.
6. Reattach the tray mount making sure to position the cable
stopper inside the groove in the opening as shown in the
illustration. Do not apply more than 8 inch-pounds of
torque.
Figure 62: Reattach tray mount
7. Slide the tray into place. You should hear an audible click
when it snaps securely into place.
To Next Page
Loading...