Other Features
106
AFTERTREATMENT
This menu permits to the driver to initiate a
stationary regeneration, to check the status of
the aftertreatment system and to interrupt
regeneration.
1. Request Parked REGEN
Use this function to initiate a stationary (parked)
regeneration.
2. ATS Status
The Aftertreatment status sub-menus provide
information about the conditions required for
performing regeneration. The status can be OK
(regeneration allowed), CHECK (regeneration
not allowed) or N/A (not applicable). When ATS
Status is selected, the following sub-menus are
available.
Soot Level Gauge
From the ATS Status sub-menu, you can view
the soot level for the Aftertreatment system.
When the soot level is high, regeneration is
necessary. L1, L2, L3 and L4 under the scale
correspond to Level 1 up to Level 4 (see Diesel
particulate filter clogging sequence – Engine
indicator lamp).
To Next Page
Loading...
