What to do if the Price Fan drone has tripped the resettable fuse on the master?
If the Price Fan drone has tripped the resettable fuse, remove the 24 VAC power supply from the Master for 15 seconds, then reapply power. If this happens again, it is recommended to contact Price.
Procedure for balancing VAV diffusers by setting maximum and minimum airflow.
How to access the Service Menu and enter the required passcode.
Description of options for forcing damper position (min, max, full open/close).
Configuration of MAC Address, Device Instance, and Baud Rate for BACnet.
Introduction to the BACnet MS/TP network interface option for Prodigy diffusers.
Guidance on wiring BACnet MS/TP networks using CAT 5 cables or hardwiring.
Steps to access and navigate the BACnet Service Menu for configuration.
How to set the MAC address using DIP switches or software settings.
Configuring Device Instance and Baud Rate within the BACnet Service Menu.
Key considerations for setting up a BACnet MS/TP network segment.
Guide to diagnosing and resolving common issues with Prodigy diffuser function.
Specific troubleshooting steps for the Price Power Module (PPM).
To Next Page
General