WARNING
If improperly handled, EAGLE may be damaged, so please follow the instructions below:
•
Do not disassemble
•
Do not open, damage or subject to electric shock or excessive impact any part of EAGLE. Do not drop.
•
Do not short the electronic elements
•
Do not expose at temperatures above 50°C
•
Do not burn or incinerate any component.
•
Do not wet any electronic or electric component
•
Do not bend, modify or force any part of EAGLE
•
Never point the EYE sensor without cap towards the Sun. If you use your telescope to observe or photograph the Sun,
please cover the EYE sensor with the proper cap provided in the box before pointing the Sun.
NOTICE In case you check any malfunction, please contact us immediately (+ 39-0434-1696106 or support@primalu-
celab.com). Do not try to disassemble, repair or modify yourself EAGLE, without our written approval, in order not to
loose the manufacturer warrantee.
Advanced use: remotely turn on EAGLE with wired connection 51
Advanced use: configure EAGLE to automatically start when power is restored 55
Controlling the telescope remotely with Cartes du Ciel 57
Autoguiding with PHD2 Guiding 64
Drift Alignment using PHD Guiding 69
Q & A 77
Add EAGLE’s ports control in external software 79
Troubleshooting 82
To Next Page
Loading...