DS600 Non-Ferrous Double Sheet Detector
This document is confidential and proprietary. No part of this document may be disclosed in any manner
to a third party without the prior written consent of Prime Controls, Inc.
202177 3 Revision M
1.5.2 Bulk Cable
Bulk cable may be used between the probe, CBL600-X cable and the controller when additional
length is needed up to 30m (100ft) total length. Cable may be ordered as 202324-X, where X is
the desired cable length in feet. Cables may be spliced using conventional techniques or
terminal strips. Color coding should be maintained across any splices to ease installation and
repairs if ever necessary. The untwisted, unshielded lead length at the splice should be kept to
a minimum. Bulk cable is not rated for continuous flex. If continuous flex is required, please
contact Prime Controls.
To Next Page
Loading...
