Primera LX900 User Manual

Label Stock 5
Section 2: Label Stock
A. LABEL AND ROLL SPECIFICATIONS
A wide variety of label stock can be used in the Printer. Refer
to the specifications and settings in the following sections
before ordering custom stock from Primera or any stock from
another company.
Important! Test all custom made label stock with the intended printer before
ordering large quantities! Primera will only assume responsibility for custom
label stock ordered from Primera.
Label Width
Liner Width
Distance from
edge of Media
to edge of Label
Width of Opening
Black Mark
Width
Gap Between
Labels
Label Height
Distance from
edge of Media
Label Sensing Methods
Method 1: Label
Gap Sensing
Method 2: Thru-Hole
Sensing
Method 3: Reflective/Black
Mark Sensing
(Black Mark must be printed
on back side of label stock)
Note: See table below for Max and Min values in inches and mm..

Primera LX900 Specifications

General

Print Technology	Inkjet
Interface	USB 2.0
Connectivity	USB 2.0
Media Sensing	Gap and black mark sensing
Supported Label Materials	Paper, Polyester, Polypropylene
Print Resolution	Up to 4800 dpi
Print Speed	Up to 4.5 inches per second
Max Print Width	8.25" (210 mm)