540876_A_PUB_DATE_1_FEB_2012.DOC PROGRAMOVACÍ MANUÁL 51
OPERATION
6.6. PROGRAMMING A DELAY TIME
Enter the selected Program Number.
Press the Dot button.
The Delay time message will be displayed.
The door must be closed first.
Now you can insert the value for a delay time
DELAYED START _ _ : _ _
First insert a value for the Hours, then insert a value for the Minutes
The minimum delay time is 1 minute [ 00:01]
The maximum delay time is 99 hours and 59 minutes [99:59]
By pressing the START button, the delay time will start to decrease.
The Door will be locked immediately.
Once the delay time is over, the wash cycle will start automatically.
The Delay Time Sequence can be interrupted by pressing the Stop button.
The program will return to the Start Up menu: SELECT CYCLE.
6.7. THE ACTIVE PROGRAM
The cycle time will decrease minute by minute and gives you an indication how long it will
take before the cycle is finished.
A Progression bar shows the progression of the wash cycle and the active wash step.
To Next Page
Loading...