78 PROGRAMOVACÍ MANUÁL 540876_A_PUB_DATE_1_FEB_2012.DOC
8.6. DIAGNOSTIC PROGRAM
The purpose of the diagnostic program is to test the wash machine functions one by one.
HOW TO GET INTO THE DIAGNOSTIC MENU
The Diagnostic menu can only be accessed when the machine is in standby (the power is switched on, but
no program is started).
Select Cycle is displayed.
Turn the washing machine to the setup mode, (see 3.3).
The Main menu is now available.
Press the ARROW DOWN button to select the Service menu.
Select the Diagnostic Program menu at the Service menu.
Select diagnostic program.
Press START if you want to start the diagnostic program.
Diagnostic Prog …
Service menu
Program No
Exit
Diagnostic Cycle
To Next Page
Loading...