540876_A_PUB_DATE_1_FEB_2012.DOC PROGRAMOVACÍ MANUÁL 69
TROUBLESHOOTING
Out Of Order (Pr XX St YY)
Ask For Service
(Err ZZZ : Fault Message)
8. TROUBLESHOOTING
8.1. DISPLAY MESSAGES
Various messages may appear on the display at the start, during or at the end of a washing cycle.
In some specific cases, an acoustic signal will alert the operator.
When an error occurs the machine will automatically go over to a safe state. With the
diagnostic program you can determine the problem. This program will test the individual functions
of the washing machine one by one.
8.2. FAULT MESSAGES
If a failure occurs the computer will display a diagnostic error message.
The program number and step at which the interruption has occurred are displayed.
The fault message itself contains a number and a corresponding text label by which it’s easy to
find the related information in the manual.
If UNLOAD is displayed, the door can be opened.
XX : the program number
YY : the program step number
Err ZZZ : the number of the occurred error
Fault Message : the text label of the error message
To Next Page
Loading...