Chapter 5 Solaris 2.6 – 7 NIC Setup
120
NIC Configuration for AIX 4
Before you set up the printer, it is good to know the ways a print job
can be filtered.
1. Standard processing. Filtering is done on the printer with no
processing on the host.
2. Local Filtering. Filtering is done on the host. Be sure to specify
the printer model during install.
Standard Processing
1. Enter SMIT select devices.
2. Select Printer/Plotter.
3. Select Print Spooling.
4. Add a Remote Print Queue.
5. Set the type of Remote Printing to Standard processing.
6. Enter the following Remote printer settings:
Name of queue any_name, user selectable
Host Name of Remote Server name in /etc/hosts file or the
NIC IP address
Name of Queue on Remote
Server
d1prn
Type of Print Spooler BSD (Press the list button and
choose BSD)
To Next Page
Loading...