Printronix Integrated Network Interface Card - Configuring AFP with CRTPSFCFG on V4 R3 and above (Optional)

Chapter 8 Configuring On AS/400 As An IPDS Printer
174
Configuring AFP with CRTPSFCFG on V4R3
and Above (Optional)
To configure the iSeries for IPDS printing on V4R3:
1. At the iSeries command line, enter a command in the form:
CRTPSFCFG PSFCFG(AFP/NETPRTP7000) IPDSPASTHR(*YES)
RLSTMR(*SEC15) TEXT(‘PRINTRONIX P7000 NETWORK ATTACHED
PRINTER’) PAGSIZCTL(*YES) ACTRLSTMR(*NORDYF)
2. A completed screen looks like Figure 45.
Create PSF Configuration (CRTPSFCFG)
PSF configuration .................... Name
Library ................................. >*CURLIB Name, *CURLIB
User resource library list ............ *JOBLIBL *JOBLIBL, *CURLIB, *NONE
Device resource library list ......... *DFT Name, *DFT
+ for more values
IPDS pass through ................... >*NO *NO, *YES
Activate release timer................. *NORDYF *NORDYF, *IMMED...
Release timer............................ >*NOMAX 1-1440, *NOMAX, *SEC15...
Restart timer............................... *IMMED 1-1440, *IMMED
APPC and TCP/IP retry count.... 15 1-99, *NOMAX
Delay between APPC retries...... 90 0-999
Acknowledgment frequency ....... 100 1-32767
Printer response timer *NOMAX 5-3600, *NOMAX
Generate PDF output *NONE *NONE, SPLF, *STMF, *MAIL
Text 'description' ...................... >*BLANK
Additional Parameters
Automatic session recovery:
Enabled ................................ *NO *NO, *YES
Message option .................... *INFO, *INQ
Blank page ................................. *YES *YES, *NO
Page size control..................... >*YES *NO, *YES
Resident fonts ........................... *YES *YES, *NO
Resource retention .................... *YES *YES, *NO