Chapter 8 Configuring On AS/400 As An IPDS Printer
166
Figure 42. Example CRTPSFCFG Command (V3R2)
3. The following parameters are required:
a. PSF Configuration (PSFCFG)
The name of the printer device you are configuring.
b. Library
Specify QGPL.
c. IPDS pass through (IPDSPASTHR)
To print SCS files, specify *YES. PSF/400 transforms SCS
into IPDS before printing.
Delay time between retries: 0
Blank page: *YES
Page size control: *NO
Resident fonts: *YES
Resource retention: *YES
Edge orient: *NO
Remote location:
Name or address: 128.99.12.134
TCP/IP port: 5001
TCP/IP activation timer: 170
PSF defined options:
Text description:
printer_type
Network Printer
Device resource library list: *DFT
To Next Page
Loading...