EasyManua.ls Logo

Printronix Integrated Network Interface Card - Page 235

Printronix Integrated Network Interface Card
310 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Store Commands
231
store tcpip del default [1|2]
Example:
store tcpip route del default1 192.75.11.1 1
Delete a default router/gateway defined by router IP Address
(<router> <ifnum>) so the NIC knows where to direct packets
destined for another subnet.
store tcpip route add [host|net] <NETWORK> [/mask>]
<ROUTER> <IFNUM> [<METRIC>]
Example:
store tcpip route add net 192.75.12.0 1
Add a static route to a particular TCP/IP host or subnet
specified by <network> so the NIC knows how to communicate
with it. Normally one entry for a default router/gateway is all that
is needed for communications between different subnets.
Please see the next command for details.
store tcpip route del [host|net] <NETWORK>
Example:
store tcpip route add net 192.75.12.0 1
Delete a static route to a particular TCP/IP host or subnet
specified by <network> so the NIC knows how to communicate
with it. Normally one entry for a default router/gateway is all that
is needed for communications between different subnets.
Please see the next command for details.
store tcpip tcp rxwin <PACKETS>
Example:
store tcpip tcp rxwin 2
Determine the receive window size for the NIC. Usually the
packets value ranges from 2 to 8, with the lower number
allowing for more simultaneous TCP connections with the print
server.

Table of Contents