1.14
Operation Manual
© 2013 Prism Media Products Ltd
Revision 1.00Prism Sound Lyra
· The installation process will then complete:
· When software installation is complete, close the dialogue box.
The Lyra device's ports should now be visible in Audio/MIDI Setup as Core Audio ports.
· Remember to register your Lyra at http://www.prismsound.com/register.
4.2 Windows installation
The following procedure installs the Lyra ASIO and WDM audio drivers, and the Lyra Control Panel
app, on your Windows PC. You must have Windows Vista or later (either 32-bit or 64-bit), and a
spare USB 2.0 or USB 3.0 port.
· Connect your Lyra to the mains supply and to a USB port on your PC with the cables provided.
· Insert the installation disc into a DVD-ROM drive on your PC.
· If the PC is set to 'Autoplay' , installation will begin automatically, otherwise double-click on the
"setup.exe" icon in the root folder of the disc.
To Next Page
Loading...