1.18
Operation Manual
© 2013 Prism Media Products Ltd
Revision 1.00Prism Sound Lyra
· You will then be prompted to confirm that you would like to install the device driver. Click 'Install':
· Installation will then complete, click 'Finish':
The Lyra device's ports should now be visible to Windows and any applications as both ASIO and
WDM audio ports.
· Remember to register your Lyra at http://www.prismsound.com/register.
4.3 Operating multiple units
Operation of multiple Lyra units connected to a single host computer is not currently supported.
It is possible that this feature may become available in future software releases.
To Next Page
Loading...