1.59
Operation Manual
© 2013 Prism Media Products Ltd
Revision 1.00Prism Sound Lyra
[Note 1]: Specification as per Lyra 2. Lyra 1 does not have analog outputs 3-4, mic input on channel
1, instrument input on channel 2, RCA/phono digital I/O, wordclock I/O or Ethernet port. Lyra 1 SRC
THD+n/dynamic range are limited to <-125dB/>125dB (0.000056%) and can only be applied to DI.
Except where otherwise stated, audio performance data are typical, RMS, unweighted, 20Hz..20kHz
figures, measured at 997Hz, using fs=96kHz and '+4dBu' sensitivity settings.
In keeping with our policy of continual development, specifications are subject to amendment without
notice.
E&OE. All Trade Marks acknowledged.
To Next Page
Loading...