10
NOTE:
The following characteristics are specific to the LCD and are considered normal behavior:
LCD screen may show unevenness in the brightness of certain images or may appear different
when seen from outside the specified viewing angle. Extended shadows, or cross-talk, may also
appear on the sides of screen images.
LCD screen pixels may contain black and white-colored spots and color display may seem to
have changed over time.
When the same image is displayed on the screen for a long period, an after-image may appear
when the image is changed. If this happens, turn off the unit, wait 10 seconds, and then restart it.
The panel brightness may decrease when used for a long time in an environment continuously
filled with inert gas. To prevent deterioration of panel brightness, regularly ventilate the panel.
For more information, please contact your local distributor at
http://www.pro-
face.com/trans/en/manual/1015.html
.
http://www.pro-face.com/trans/en/manual/1015.html
NOTE: Do not display the same image for a long time. Change the screen image periodically.
NOTE: The Slim Panel is a highly configurable device and is not based on a real-time operating
system. Changes to the software and settings of the following must be considered new implemen-
tations as discussed in the previous warning messages. Examples of such changes include:
System BIOS
System Monitor
Operating system
Installed hardware
Installed software
WARNING
UNINTENDED EQUIPMENT OPERATION
Use only Pro-face software with the devices described in this manual.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
To Next Page
Loading...