Slim Panel Connections
44
Grounding I/O Signal Lines
Electromagnetic radiation may interfere with the control communications of the Slim Panel.
DANGER
POTENTIAL FOR EXPLOSION IN HAZARDOUS LOCATION
Do not use this product in hazardous locations.
Failure to follow these instructions will result in death or serious injury.
WARNING
UNINTENDED EQUIPMENT OPERATION
If wiring of I/O lines near power lines or radio equipment is unavoidable, use shielded cables
and ground one end of the shield to the Industrial Personal Computer ground connection
screw.
Do not wire I/O lines in proximity to power cables, radio devices, or other equipment that may
cause electromagnetic interference.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
To Next Page
Loading...