PS5000 Series (Slim Panel Type Atom Model) User Manual
57
LAN Controller Submenu
CSM Parameters Submenu
Optional PCH-FW Configuration Submenu
USB Configuration Submenu
BIOS setting Description
LAN A Controller –
LAN B Controller –
Wake on LAN Enable –
BIOS setting Description
CSM Support –
GateA20 Active –
Option ROM Messages –
Boot option filter –
Network –
Storage –
Video –
Other PCI devices –
BIOS setting Description
MDES BIOS Status Code Enable or disable MDES BIOS status code.
fTPM Device Selection Select GPDMA work-around or MSFT QFE solution.)
TPM Device Selection Enable or disable TPM device selection. (PTT or dTPM. PTT-Enables PTT
in SkuMgr dTPM 1.2- Disables PTT in SkuMgr informing! PTT/dTPM is
disabled and all data saved on it is lost.
Firmware Update
Configuration
ME FW Image Re-Flash: Enable or disable ME FW image re-Flash function.
BIOS setting Description
Legacy USB Support Enable or disable legacy USB support. Auto option disables legacy support
if no USB devices are connected. Disable option keeps USB devices
available only for EFI applications.
XHCI Hand-off Enable or disable XHCI hand-off. This is a work around for OS without XHCI
hand-off support. The XHCI ownership change should be claimed by XHCI
driver.
EHCI Hand-off Enable or disable EHCI hand-off. This is a workrooms for OS without EHCI
hand-off support. The EHCI ownership change should be claimed by EHCI
driver.
USB Mass Storage Driver
Support
Enable or disable USB mass storage driver support.
USB transfer time-out Select time-out section. The time-out value for control, bulk, and interrupt
transfers.
Device reset time-out Select device time-out section. USB mass storage devices start unit
command time-out.
To Next Page
Loading...