ProArc PT-200s - HMI Operation and Controls; Pulse Adjustment Knob Functionality

6
2.1 HMI OPERATION
Emergency stop.
Auto start / Auto stop.
Pulse adjustment knob：
1. Press the pulse adjustment knob to display red flashing cursor beside
Rpm and mm/min. Rotate the knob to modify speed.
2. Press the pulse adjustment knob again to display red flashing cursor
beside Amperage A2(H) & A3(L). Rotate the knob to modify both A2(H)
& A3(L).
3. Press the pulse adjustment knob again to cancel red flashing cursor and
disable online adjustment feature.