13
Prodigy Diabetes Care, LLC 1.800.243.2636
Prodigy Meter Owner’s Manual
The Prodigy Preferred
TM
Meter has the date, time and unit of
measurement presets. However, if you replace the battery, you
should check and update the time and date.
STEP 1: Insert the Battery
Open the battery cover located on the backside of the meter. Insert
one (1) 3 Volt CR2032 lithium battery.
STEP 2: Enter Set-Up Mode
Start with the meter off. Then press the “SET” button located in the
battery compartment. The meter is now in the set-up mode.
STEP 3: Set the Year
The year appears with the number
flashing. Press and release the “M”
button to advance the year. With the
correct year on the display, press the
“SET” button and the date will appear
on the display with the month segment
flashing. See Figure 6.
STEP 4: Set the Month
Press and release the “M” button to
advance the month. With the correct
month on the display, press the “SET”
button and the date segment will start
flashing. See Figure 7.
Set-Up Steps
Figure 6
Figure 7
To Next Page
Loading...
Need help?
General
