Prodigy Diabetes Care, LLC www.prodigymeter.com
Prodigy Meter Owner’s Manual
14
STEP 5: Set the Date
Press and release the “M” button to
advance the date. With the correct date
on the display, press the “SET” button
and the time will appear on the display
with the hour segment flashing.
See Figure 8.
STEP 6: Set the Hour
Press and release the “M” button to
advance the hour. With the correct hour
on the display, press the “SET” button
and the minutes segment will start
flashing. See Figure 9.
STEP 7: Set the Minutes
Press and release the “M” button to
advance the minutes. With the correct
minute on the display, press the “SET”
button and the current unit of
measurement will start flashing.
See Figure 10.
IMPORTANT: Day averages are
calculated from results obtained during
the 7, 14 and 28 days preceding the
current date and time settings. When
the date and time are changed, the 7,
14 and 28-day averages may change.
Figure 9
Figure 10
Figure 8