Blood Glucose Monitoring System - User’s Manual
Diagnostic Devices, Inc www.prodigymeter.com 1.800.243.2636
29
PLEASE NOTE
• Do not push your finger (with blood on it) against the test strip or try to apply a smeared
sample on the test strip.
• If you do not apply a blood sample to the test strip within 3 minutes, the meter will
automatically turn off. You must remove and reinsert the test strip to restart the test
procedure.
• Anytime you can press the “M” button to skip the current voice message and go to the
next step.
• If you want to hear the previous voice message, you can press the “Repeat” button
to replay it.
• The blood should be completely fill the confirmation window before the meter begins
to count down. If you find that the confirmation window is not filled with blood when the
meter is counting, NEVER try to add more blood to the test strip. Discard the test strip
and retest with a new one.
• If you have trouble filling the test strip, please contact the Technical Support for help.
STEP 6 Eject the Used Test Strip
After finishing the measurement, you can either take
out the used strip by simply pushing up the Strip-Eject
button or remove the test strip directly with your hand.
“OFF” is shown after the used strip is ejected and the
meter will shut off automatically afterward.
Voice SPEAKS: “Have a nice day.”
PLEASE NOTE
Please make sure the eject button is pointed into a disposal container.
To Next Page
Loading...
