EasyManua.ls Logo

Profitec PRO 400 - Proper Use; Machine Description; Machine Parts

Profitec PRO 400
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
Translation of the original German user manual 27
Important
You should use water with a max. hardness of 4° dH in order to protect your machine from
lime scale damage. When necessary, make use of a water softener / water filter cartridge
to reach an adequate degree of hardness. If these measures are insufficient, a
prophylactic descaling of the machine may be necessary. Contact your specialized dealer
before undertaking this measure.
An already calcified machine may only be descaled by your specialized dealer because a
partial disassembly of the boiler and the tubing may be necessary to prevent the system
from being blocked by lime residues.
A late descaling can cause substantial damage to the machine.
2.2 Proper use
The PRO 400 is designed to be used for the preparation of coffee, hot water and steam only. The machine
is not intended for commercial use.
Use of the machine other than for the above-mentioned purpose is not recommended. The manufacturer
cannot be held responsible for damages due to unsuitable use of the machine and is not liable to
recourse.
This appliance is intended to be used in household and similar applications such as:
staff kitchen areas in shops, offices, and other working environments
by clients in hotels, motels and other residential type environments
3 MACHINE DESCRIPTION
3.1 Machine parts
1 Cup heater (removable)
2 Fresh water tank (under the cup heater)
3 Steam valve
4 Steam wand
5 Brew group
6 Dual pressure gauge
7 ON/OFF switch
8 Green LED
9 Drip tray (underneath: Bracket for the blind filter)
10 Hot water valve
11 Hot water wand
12 Portafilter
13 Brew group lever
14 Coffee spout
15 3-position switch (on the underside of the
machine).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

Table of Contents

Related product manuals