ENGLISH
Translation of the original German user manual 36
3. Set the brew group lever up.
4. Set the switch to the middle
position (position 0).
5. Switch on the machine.
6. The green LED flashes.
10. Turn the brew group lever down.
Now you have 5 seconds to make
the setting. After this time, the
machine automatically switches to
normal operation.
11. Set the switch to the front position
(position I) and then back to the
middle position (position 0).
12. The setting is confirmed and saved
when the green LED is on.
6.6 Machine reset
You can reset the Pro 400 to the factory settings.
To Next Page
Loading...
