ENGLISH
Translation of the original German user manual 42
Follow the steps as indicated below:
The machine is ready to be used again, as described in chapter 6 of the user manual.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or similar.
The steam nozzle may be unscrewed as well to assist in its cleaning.
Important
Do not lose the small gasket situated between the steam nozzle and the thread!
Afterwards, replace the steam nozzle.
8 TRANSPORT AND WAREHOUSING
8.1 Packing
The PRO 400 is delivered in a special carton and protected by a plastic cover and foam.
Caution!
Keep packing out of the reach of children!
Important
Keep packing and packing material for possible transport! Do not throw it away!
• Transport the machine in an upright position only. If possible, on a pallet.
• Do not tilt or turn the machine over.
• Do not stack more than three units on top of each other.
• Do not place other heavy items on the packing.
• Do not expose the machine to inclement weather (frost, snow, rain)
7
Insert the shower screen into
the brew group.
8
Take the portafilter without filter.
9
Clamp the portafilter into the
brew group.
10
Then, move the portafilter until
the shower screen is locked
firmly into the gasket.
11
Now you can easily lock the
portafilter into place.
12
The group is ready for use.
To Next Page
Loading...
