ProLights UNICO - Page 37

7
UNICO
1. MOVING HEAD
2. ROTARY ARM
3. HANDLE
4. LED INDICATOR
- Power On
- Battery Status
- Receive the wireless signal
- DMX input present
5. LCD DISPLAY
6. CONTROL PANEL with 4 button used to access
the control panel functions and manage
them:
- MENU button: scroll through the main
menu or exits from the current submenu.
- UP button: scroll 'up' through the menu
list or increase the value of the current
function.
- DOWN button: scroll 'down' through the
menu list or decrease the value of the
current function.
- ENTER button: enter the currently selected
menu or conrm the current function value.
7. DMX IN (3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
8. DMX OUT ( 3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
9. DMX IN (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
10. DMX OUT (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
11. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable.
12. ON/OFF SWITCH
13. MAIN FUSE HOLDER: replace a burnt-out fuse
by one of the same type only (T 5 A).