ProLights UNICO - Maintenance and Care; Unit Cleaning and General Maintenance

23
UNICO
• Press the MENU button and select through directional buttons the [FIXTURE TEST] menu voice, then select
[Auto Test]. To conrm and start the automatic test press the ENTER button.
Manual Test
Allows you to adjust eects from the control panel to obtain perfect uniformity between the projectors.
• Press the MENU button and select through the directional buttons the [FIXTURE TEST] menu voice, then
press the ENTER button to conrm the choice.
• Select the parameter to be changed and press the ENTER button to conrm the choice.
• Set the desired parameter value between the [0 - 255] range using the UP/DOWN buttons and press the
ENTER button to conrm the setting.
• Press the MENU button to go back or wait one minute for automatic exit from the menu.
3.15 FIXTURE INFORMATION
Enter MENU mode, select [FIXTURE INFORMATION], press ENTER button to conrm, use UP/DOWN button to
select options.
- [Fixture use time] - Select [Fixture Use Time], press ENTER button to conrm, xture use time will show on
the display, press MENU button to exit.
- [Lamp on time] - Select [Lamp on time], press ENTER button to conrm, lamp on time will show on the
display, press ENTER button to conrm, use UP/DOWN button to select [Exit] or [Reset Time], press
ENTER button to conrm. Press MENU button back to the last menu or exit menu mode let the unit
idle one minute.
- [Firmware Version] - Select [Firmware Version], press ENTER button to conrm, rmware version will show
on the display, press MENU button back to exit.
3.16 RESET FUNCTIONS
Used for restoring “Home position” values on all options menu items.
• Press the MENU button and select through directional buttons the [RESET FUNCTION] menu voice. Press
ENTER button.
• Select the function to be changed from [Pan/Tilt, Shutter/Prism, Color, Gobo, Focus or All]. Press the ENTER
button to conrm the choice.
• Using the UP/DOWN, select [Yes] or [No] to restore the “Home position” value of the selected function.
3.17 SPECIAL FUNCTIONS
• Press the MENU button and select through the directional buttons the [SPECIAL FUNCTION] menu voice.
• Press the ENTER button to conrm.
It is possible to view to following information:
Fixture Maintenance
• Select the [Fixture Maintenance] menu voice. Press the ENTER button to conrm.
• Select the [Interval] menu voice and press the ENTER button to view the time range between two main-
tenance operations. Press the MENU button to go back.
• Select the [Remain Time] menu voice and press the ENTER button to view the remaining time. Press the
MENU button to go back.
• Select through directional buttons the [Exit] or [Reset time] menu voice, to exit or reset the time.
• Press the ENTER button to conrm the choice.