PROLiNK PEN1201 - Technical Specification

PROLiNK® PEN1201 Wireless-N 300Mbps Range Extender II
Page 40
5 Technical Specification
SPECIFICATIONS
Hardware
Interface
2x 10/100Mbps WAN/LAN ports
1x WPS/Pairing button
1x Operation Mode Switch
1x Power On/Off Switch
1x Reset Button
LED
1x Wi-Fi Signal and Status
Power Supply
Direct wall-plug
Rated
Voltage/Frequency
Input: 100 – 240 VAC, 50/60Hz. 0.3A
Dimensions
99mm x 60mm x 70mm
Wireless
Wireless Standards
IEEE 802.11b/g/n
Wireless Frequency
Band
2.4GHz Wireless-N
Wireless Link Rate
Up to 300Mbps at 2.4GHz Wireless-N
Wireless Antenna
2x Internal 3dBi Antenna
Wireless Security
WPA2-PSK encryption
Software
WAN Connection
Type
Repeater mode, AP mode, Router mode (Dynamic IP,
Static IP, PPPoE)
DHCP Setting
DHCP Server, DHCP Client
Environmental
Operating
Temperature
0
o
C ~ 40
o
C
Storage Temperature
-10
o
C ~ 70
o
C
Relative Humidity
(Operational)
10% ~ 90%, non-condensing
Relative Humidity
(Storage)
10% ~ 90%, non-condensing
Note: Product Specifications may change without prior notice