Promation Engineering P2 Series - Table of Contents

FM15_P28 HV PN7 (-TS) Ver I_052217
Table of Contents
1 ........................Hazardous Location Actuators
3 ........................Product Specifications
4 ........................Shipping and Handling
4 ........................Product Mounting and Setup
5 ........................Wiring Diagram
7 ........................Diagram of Controller
8 ........................Controller: Initial Startup
8 ........................Controller: Change INput/OUTput signal type
9 ........................Controller: Adjusting the actuator CW position
10 .......................Adjusting the actuator CW position
11 .......................Controller: Adjusting the actuator CCW position
12 .......................Adjusting the actuator CCW position
13 .......................Controller: Change Loss of Signal Response Setting
14 .......................Controller: Auto-Calibration Procedure
15 .......................Adjusting the actuator Auxiliary Switches
16 .......................Mechanical Data
17 .......................Mechanical Data
18 .......................Commissioning
Page 2 P2/3 HV-PN7 Series
Field Manual
P2/3 HV-PN7
Proportional Control
ISO5211 F07 8P22
* This IOM contains information for units without Torque Switches ONLY.
238703
C US
®