Proroute H685 - WAN RJ45 Pppoe and Cellular Fail over Backup Redundancy

Forallenquiriespleasevisitwww.proroute.co.uk

Step5)TheProrouteH685willautomaticallyrebootandtrytoconnecttheDHCPWANRJ45as
mainline.Ifmainlinefails,itwillswitchtoCellassecondaryline.AndifDHCPWANRJ45
resumes,itwillswitchfromCelllinetoDHCPWANRJ45line.

Thefollowing
pageindicatedtheDHCPisworking.


OncetheDHCP(Autoconfig)isfailed,PROROUTEwillswitchtocellularautomaticallyasfollows,


Notes:iftheDHCPcannotgetWANIPAddress,please“LoadDefault”forProrouteH685to
retry.
4.7WANRJ45PPPoEandCellularFailOverbackupredundancy
Please
connecttheRJ45WANportandtheADSLmodemRJ45portviaRJ45cable.The
PROROUTEWANLEDshouldbeon.
Step1)logintotheProrouteH685web.
Step2)InternetSettings–RouteFailOver