Proroute H685 - IPsec VPN Sample Test

To Next Page

To Previous Page

Forallenquiriespleasevisitwww.proroute.co.uk



Notes:

1)IfthePPTPcannotthroughbetweenclientandserver,pleasecheckiftheMPPEconfiguration

ismatchedwith PPTPserverornot.

2)NormallyPPTPserverhasroutefor192.168.1.1/24or192.168.0.1/24.PleasecheckthePPTP

serverhastherouteof192.168.8.0/24ifyourH820routeris

withIP192.168.8.1



4.11IPSecsample

Preparationbeforetesting:

1) TaketwoProrouteH685,oneforIPSecServer,theotherisforIPSecclient .Forformalapplication,it

isrecommendtouseCISCOVPNRouterforServer,andProrouteRouterforClient.

2) WeconfigureServerRoutergatewayLANIPas192.168.8.1,and

ClientRoutergatewayLANIPas

192.168.9.1.Ple aserefertothemanualchapter

3) MakeServerRouterandClientRouterarebothonline.HereweuseCellconnectionforbothrouters.

4) Sampletopologyisasfollows,