Proroute H685 - Port Forwarding (NAT, NAPT) Test

To Next Page

To Previous Page

Forallenquiriespleasevisitwww.proroute.co.uk



Picture:Feedbackstringifgetsthesatellite.



4.3PortForwarding(NAT,NAPT)test

Note:thetestissimulationonly.Pleaseensureitworksinyourapplication.



Note:

Question:Iconfiguredtheportforwardingfeaturecorrectly,butstillnotworking.

Answer:PleaseaskiftheportisblockedbyyourISP,

someISPsblockcertainportsforsecurity

reasons.

Forexample,theProroutegetsWANIP27.38.14.223.AndtheProroute’sdefaultwebportis80.

Sofromtheothernetwork,trytovisithttp://27.38.14.223:80Ifnotokay,itmeanstheISP

blocks80port.ThencheckwithyourISPwhich

portsareopenforuse.Thenre‐trytheport

forwardingfeature.



Step1)PutProrouteonline.