Proroute H685 - Page 30

Forallenquiriespleasevisitwww.proroute.co.uk

 
 IPsecconnectname:makesurethenameinclientandserveraresame,wesuggesttouse
domainname(111.vpn1.com).ifyouwanttobuildapoint‐to‐pointchannel,theIPsecname
havetobewrittenasDEV+equipmentID+name(DEV281250D52F2A1452.vpn1.com),and
makesureboththeclientandserverare
inputingClientequipmentID.Youcanfind
PROROUTE’sIDin theStatusinterface.
 ServiceMode:Server/Client
 Mode:Main/Aggressive.TheAggressivemodeiscommonlyused.
 RemoteGateway:ThischoicejustappearsintheClientmodeanditisusedtofilltheIP
addressintheServer.
 LocalIPaddress:FillLANIPofthisdevice.YoucanfillanIPoranetworksegment.
 RemoteIPaddress:FilltheIPoftheotherroute r.
 Authentication:Commonly,Pre‐SharedKeyischosen.AndtheClientandServermust
choosethe samekey.
 AdvancedAKEsettings:Therearesomeencryptionmethodsinthisfield.Youmustusethe
settingsinthisfieldwhenVPNtunnelneedstobebuiltbetweenPROROUTEandother
brandVPNserver.