ProStar 1K - Page 31

To Next Page

To Previous Page

4.7.5 Battery end of discharge voltage setting (EOd)

Interface

Setting

When EP is ON, turn to battery end of discharge voltage setting

page[EOd]. You can set EOd as below value: dEF(default), 9.8V,

9.9V,10V,10.2V,10.5V.

Battery end of discharge voltage varies with load:

10.5V: @load<25%,

10.2V: 25%<@load<50%,

10V: @load > 50%.

Set EOd to 10.5V.

4.7.6 ECO setting (ECO)

Interface

Setting

When EP is ON, turn to ECO setting page[ECO].

You may choose the following two options:

OFF: ECO mode disable (Default)

ON: ECO mode enable

Set ECO to ON.